Chapin 31410 User Manual download pdf

6-4626

Shut-o Handle

Mango de cierre

Poignée du robinet

Hazard: Improper use or failure to follow instructions can result in explosive failure causing

serious eye or other injury. For safe use of this product you must read and follow all instructions.

Do not leave a pressurized sprayer in the hot sun. Heat can cause pressure build-up. Do not store

or leave solution in tank after use. Always wear goggles, gloves, long sleeve shirt, long pants and full

foot protection when spraying. Never use any tool to remove pump if there is pressure in sprayer.

Never stand with face or body over top of tank when pumping or loosening pump to prevent eject-

ing pump assembly and/or solution from striking and injuring you. Never pressurize sprayer by any

means other than the original pump. Do not attempt to modify or repair this product except with

original manufacturer’s parts. Never spray ammable materials or heat, pressure, or gas produc-

ing chemicals. Always read and follow manufacturer’s instructions before use with this sprayer

as some chemicals may be hazardous when used with this sprayer.

WARNING!

Sk-1113-1

Parts, Piezas, Pièces

6-6136

Hose

Manguera

Tuyau

Note: Your particular sprayer may not include all parts pictured above.

Nota: Es posible que este pulverizador en particular no incluya todas las partes que se ilustran arriba.

Remarque : Votre pulvérisateur particulier pourrait ne pas inclure toutes les pièces illustrées plus haut.

Repair Parts Kit Gaskets and Seals (not included),

Juego de piezas de reparación, empaquetaduras y juntas (no incluido)

Kit de pièces de réparation, joints et garniture d’étanchéité (non inclus) 6-1925

Printed in USA

1. Hose to Tank

2. Nozzle

Attach nozzle to shut-o handle or extension wand.

1) Do: Check tightness of hose nut to be sure hose is securely attached to the tank

outlet.

2) Do: Inspect hose for deterioration, cracks, softness, or brittleness. If any of these

conditions are found, replace hose before using. Replace with original manufacturer’s

parts only.

3) Do: Remove pump (see Filling, Pressurizing and Spraying Instructions), inspect

interior and exterior of tank for signs of deterioration of body and bottom. Any sign

of deterioration indicates possible tank weakening and could result in explosive

bursting under pressure. If any of these signs are found, discard tank immediately and

replace. Do not attempt to patch leaks, etc., as this could result in serious injury.

4) Do: Follow Filling, Pressurizing and Spraying Instructions, except use water only.

5) Do: Pump plunger 10-20 strokes and inspect for leaks.

6) Do: Direct shut-o away from you and open to make sure discharge is not clogged.

7) Do: If unit passes this test, release pressure (see Pressure Releasing Instructions),

empty tank, and proceed with Filling, Pressurizing and Spraying Instructions.

3. Pre-Use Check

4. Filling

1) Do: Turn pump handle counterclockwise and remove pump

2) Do: Prepare spray solution following all directions and safety warnings on

chemical label.

3) Do: Fill tank to no more than the proper gallon marker. Do NOT: overll to

accommodate pump.

4) Do: Check pump to make sure that no grass or dirt is stuck to barrel. Replace pump

in tank and tighten securely.

7. Care, Storage and Maintenance

1) Do: Rinse tank thoroughly with water only, empty, rell with water. Follow Filling,

Pressurizing and Spraying Instructions, except pump unit only 10-15 strokes.

2) Do: Open shut-o and allow water to run through discharge assembly.

3) Do: Release pressure (Follow Pressure Release Instructions), remove pump and

empty sprayer.

4) Do: Store sprayer tank upside down, with pump removed, in a warm dry location.

5) Do: Periodically oil pump by dropping 10-12 drops of light oil down pump rod through

opening in cover.

6-5943

Nozzle

Tobera

Buse

WARNING: Handling the brass parts of this product will expose you to lead, a chemical known

to the State of California to cause birth defects and other reproductive harm. Wash hands after

handling.

Congratulations!

You have just purchased a quality Chapin product.

Questions?

Do Not Return To Store.

Call us @ 1-800-950-4458 or www.chapinmfg.com

¡Felicitaciones!

Usted acaba de adquirir un producto de calidad Chapin.

Registre su pulverizador en línea en www.chapinmfg.com

¿Preguntas?

No regrese a la tienda;

llámenos al 1-800-950-4458 o visite www.chapinmfg.com

Félicitations!

Vous avez acheté un produit de qualité Chapin.

Enregistrez dès que possible votre pulvérisateur en ligne à l'adresse suivante:

www.chapinmfg.com

Questions ?

Ne retournez pas au magasin.

Appelez-nous 1-800-950-4458 ou visitez le www.chapinmfg.com

011269 (A) R0000

6-3337

Strap, Correa, Sangle

( 31020, 31030, 36140, 30220)

6. To Release Pressure

1) Do: With pump facing away, turn locked handle counterclockwise until

air begins to escape. Stop turning handle when you hear air escaping.

2) Do: Stay away from the sprayer until all air has escaped.

6-7756 Extension wand, Vara de extensión, Rallonge

(31010, 31020, 31030, 36140)

6-7749 Extension wand, Vara de extensión, Rallonge

(30220)

Make sure hose is pushed all the way to

the tank. Make sure hose clamp is tight

and below the hose barb. Turn clockwise

with a screwdriver to tighten.

Hose Barb

8. Fatigue-Free Spraying

For constant spraying, push down on shut-o handle

and move grey locking mechanism away from you.

To release, squeeze handle and move the grey locking

mechanism back towards you. ( Not all models are

provided with this feature).

Locking

mechanism

P.O. Box 549 700 Ellicott St.

Batavia, NY 14021-0549 U.S.A.

1-800-950-4458 www.chapinmfg.com

2B2A

5. Pressurizing and Spraying

Pump until you feel

resistance.

Turn handle clockwise

to tighten. Push handle

down, turn 1/4 turn

counterclockwise to

release.

Push handle, down,

turn 1/4 turn clockwise

to lock. Begin spray-

ing.

Re-pump sprayer as

required to maintain

spray force.

Adjust spray pattern

by turning nozzle cap.

Do not turn cap more

than 2 turns or cap may

come o allowing spray

material to spray back

on you.

Pull handle

straight up.

Insert notches from un-

derside of handle into

plunger grooves and

turn counterclockwise.

Remove plunger and diaphragm.

Clean plunger, diaphragm and body. Flip

diaphragm and replace.

Tighten plunger clockwise until ush

to top of shut-o body. Do not over-

tighten or unit may not spray. Slide

forks under plunger, push handle

down until it snaps into place.

9. Troubleshooting

Tank pressurizes but does not spray.

9A 9B

Handle

Plunger

Body

Diaphragm

Plunger ush

with body

WARNING:

Release pressure in tank before troubleshooting.

Clean Nozzle Assembly (Fig. 9E)

Remove nozzle cap. Clean and re-assemble.

Clean shut-off (Fig. 9A- 9D)

Nozzle Cap

1 2

Summary of Contents

Page 1 - WARNING!

6-4626Shut-o HandleMango de cierrePoignée du robinetHazard: Improper use or failure to follow instructions can result in explosive failure causing se

Page 2 - ADVERTENCIA!

1) Sí: Verique el ajuste de la tuerca de la manguera para asegurarse de que la manguera esté unida correctamente a la salida del tanque. 2) Sí:

Related models: 31430 | 7221781 | 7221799 | 7221807 | 31440 |

Comments to this Manuals

No comments

Chapin 31410 User Manual

Browse online or download User Manual for Water equipment Chapin 31410. Chapin 31410 User Manual

Summary of Contents

Related models: 31430 | 7221781 | 7221799 | 7221807 | 31440 |

Comments to this Manuals

Related products and manuals for Water equipment Chapin 31410